Gas connection




Both natural gas as well as liquefied gas can be used as fuel. The gas type can be switched over without great effort.

Mounting the gas connection hose

In order to compensate for thermal expansions of the device, the connection between the gas connection on the burner and the gas pipe is established using a flexible metal hose and a ball valve (see figure). A detachable connection must be provided between the ball valve and the gas connection on the burner.

Refer to the individual data sheets for the the gas connection pressure which must not exceed 50 mbar.

When conducting the pressure test, the ball valves must be closed to avoid damage to the gas combination block in the burner.


Only specialised companies are permitted to work on the gas pipe in conformity with the applicable TRGI stipulations and other regulations.

 Mounting the gas connection hose